How Do I Delete My Internet Explorer 6 Cookies?

1. Tools Menu
2. Select Internet Options
3. Select “General” Tab
4. Select “Delete Cookies” Button
5. Select “OK”

How Do I Delete My Internet Explorer 7 Cookies?

1. Tools Menu
2. Select “Delete Browsing History”
3. Select “Delete cookies…”
4. Select “Yes”

How Do I Delete My FireFox Cookies?

1. Tools Menu
2. Select Options
3. Select “Cookies” Tab
4. Select “Delete Cookies Now” Button

How Do I Delete My Netscape Cookies?

1. Tools Menu
2. Select Options
3. Select Privacy
4. Select Clear (Next to Cookies)

How Do I Delete My Opera Cookies?

1. Tools Menu
2. Select Preferences
3. Select Advanced
4. Select Cookies
5. Select Manage Cookies
6. Select the website
7. Select Delete

If you’re confused or have questions please feel free to leave us a comment below or send us your questions to @BL3NDlabs on Twitter.

How do I find my IP address in Windows?

1. Click START from the menu bar.
2. Click on Run.
3. In the Run box type “CMD“ (This will bring up a black box, a Command Prompt).
4. At the Command Prompt type “ipconfig /all“ (ipconfig stands for IP Address Configuration and the /all tells the computer to show you all information pertaining to your various network connections (wired, wireless & virtual))
5. If you’re looking for your Wired IP Address the result be be under “Local Area Connection“. If you’re looking for your Wireless IP Address the result will be under “Wireless LAN adapter…” (see picture below).
6. IPCONFIG will present you with more data than you’re looking for however the IP Address can be found under either “IP Address“ or in Windows 7 it is called “IPv4 Address“. Once you’ve located that row your IP Address will look something like 192.168.1.111 (it will be in the x.x.x.x format). Thats it, you’ve found your IP!

How do I find my IP address in Mac OS X?

1. Click on the Apple icon located at the top left of the screen and select “System Preferences…“.
2. Select “Network“ from the System Preferences window.
3. On the left hand side select the network adapter you’re currently using to access the network. “Built-in Ethernet” is your wired connection and “Airport” is your wireless connection.
4. Once you’ve selected the appropriate network adapter your IP Address will be revealed on the right pane in your Network System Preferences (see picture below).
   

How do I find my IP address in Linux?

1. From a command prompt type “ifconfig -a“ (ifconfig stands for interface configuration and the -a tells the computer to show all network interfaces.
2. Locate your connected network adapter. Typical Linux network adapters naming conventions are  “eth0” for a wired adapter and “wlan0” for a wireless adapter.
3. You will find your IP Address formatted as “inet addr: 192.168.1.100“ (see picture below).
   

If you’re confused or have questions please feel free to leave us a comment below or send us your questions to @BL3NDlabs on Twitter.

Unpack / Boot-Up

1. Place the wireless router in a central location to where you will want to access the Internet. Keep in mind that a good router will reach about 150 feet in diameter without ANY obstructions. In a home you have walls and furniture that will greatly reduce the range this wireless network will reach. Also keep in mind that you will need access to a power outlet and your ISP modem.
2. On the reverse (back) side of the Linksys router you will find 4 LAN ports, 1 WAN/Internet port, a reset port and an AC power port (see pic). Plug your Ethernet cable from your modem into the WAN port.
3. Now insert another Ethernet cable into any of the 4 available LAN ports and the other end into your computers Ethernet port.
4. Plug in the power to the available outlet.
5. While the Linksys router boots the power light will blink, once it stops blinking it has completed booting-up. This process could take up to 2 minutes.
6. Reboot your computer so it can obtain a new IP address from the router through the Dynamic Host Configuration Protocol (DHCP).

Configuration

1. Open a browser (Firefox, Safari or Internet Explorer), type http://192.168.1.1 into the address bar and press enter.
2. When prompted for a username type “admin“. The password can be left blank. In a few Linksys routers (depending on the model) the password can be “admin”. You can lookup your model here.
3. Click on the “Internet Setup” wizard.
4. Choose your connection type from the drop-down menu. Choose “DHCP” for dynamic IP (non-static), this includes most basic cable or DSL modems. If you are unsure of these options, check with your ISP.
5. Set the name of your wireless network (SSID) to identify the router and change the password.
6. Encrypt your wireless network using WPA or WPA2 standards. Under the “Wireless Security” option, enter a passphrase you will remember.

Thats it! The most difficult of these steps are the last three. Wireless security is very important as most ISPs will hold the account holder (thats YOU!) accountable for sharing copyrighted content on popular filesharing networks. In addition this will help keep the spammers off your network and keep your computers safe from prying eyes.

If you’re confused or have questions please feel free to leave us a comment below or send us your questions to @BL3NDlabs on Twitter.